Teddy bear

I present to you the step-by-step process of making a moving toy of paper "Bear". The master class will be useful for primary school teachers, kindergarten teachers, young parents who have a small child. It will seem to the kid interesting in that the toy with the help of the thread moves the legs.
In addition, moms and dads can make such toys themselves and introduce their children to wild and domestic animals in a playful way. Also, the older guys, following step by step and relying on the photographic material, can make a teddy bear with their own hands and present them to younger friends.
For the manufacture will need the following material:
- sheets of colored paper in blue, red and orange;
- white cardboard (1 sheet);
- glue PVA or a pencil;
- scissors;
- a coil of wire with a diameter of 0.45 mm;
- a simple pencil;
- awl;
- stand for making holes with an awl in the places of fastening details of the bear;
- spool of thread;
- a black thin marker for drawing the eyes and nose of a bear cub (can be replaced with black paper);
- toy template - bear: the basis of the toy, legs back and front (movement elements), washers in the amount of 12 pcs.
the following material will be needed

base toys

Description of work
Step number 1. According to a pre-prepared pattern of a bear cub, it is necessary to cut out “clothes” from colored paper so that the toy becomes bright.
To do this, mark on colored paper decoration elements for a bear. From orange paper - bear's nose, blouse (upper torso), from blue - tie and pants (lower torso).
decorations for the bear

Step number 2. Now we cut out all the details with scissors.
cut everything

Step # 3. Using a glue stick we glue the orange parts onto the bear (nose, blouse).
Clay with pencil

Step # 4. Then paste the blue details in the same way: pants, tie, draw the eyes with a black marker and draw the outline of the nose.
paint on

Step # 5. We take an awl and a stand to make holes in the details - the paws of the toy and on the main part of the bear cub.
make holes in the details

Step 6. Take a coil of thread and cut off 4 pieces from it, each up to 20 cm, then fold it in half (for durability). We pass through the upper holes in the paws of the bear and tie them in a knot.

Step number 7. To fasten the parts we need a wire, scissors and an awl.
fasten with wire

Step number 8.It is necessary to cut a piece of wire about 10 cm. Then, thread it in this way: washer, main part (body), washer, foot, washer. We twist the ends of the wire with the help of an awl.
fasten with wire

Step number 9. It turned out in this way to attach the upper and lower legs to the body.
paper toys Teddy bear

Step 10. On the back of the toy, we connect the threads of the upper and lower legs. Excess thread cut off.
bind together threads

Step 11. It is now necessary to thread the upper thread fastening, which connects the front legs with the lower thread fastening, which connects the bear's hind legs, to make movements behind it, pulling it down.
bind together threads

Step number 12. Toy - bear is ready to start the game!
paper toys Teddy bear

Related news

Teddy bear image, picture, imagery

Teddy bear 14

Teddy bear 57

Teddy bear 77

Teddy bear 37

Teddy bear 31

Teddy bear 92

Teddy bear 48

Teddy bear 73